Leveraging our historic achievements and expertise in design and manufacture of heat transfer products, we continue to develop and expand our product range for the ever-evolving process industry.
We cater to the international land based oil/gas, power and energy sectors and have supplied equipment to power stations, petrochemical facilities, mines and metal production facilities, pharmaceutical and refining industries and to most mid stream industrial engineering sectors such as automotive, paint, food/beverage, wood pulp and paper manufacturing industries.
Our goal is to provide economical solutions for power generation with increased plant efficiency, reduce harmful environmental emissions whilst saving energy.
INDUSTRIAL BOILERS
STEAMPACKET M
OIL / GAS OR DUAL FUEL FIRED PACKAGE BOILER
A Steampacket Packaged Boiler is a smoke tube wet back construction without refractory at the rear and lends itself for easy conversion to various oil and gas fuels with heat release rate for quick and uniform combustion.
The fully automatic controls with auto change over switch for emergency manual control give flexibility to the operation. Maintenance is easy with end to end doors for fast cleaning and minimum downtime.
The M Series are fitted with either pressure jet spill return Monoblock burners or gas firing burners or dual fuel firing types. The steam output range is from 1 TPH to 5 TPH on F&A 100 Deg C conditions with all essential fittings assembled on a base for minimal space requirement and simple installation.
STEAMPACKET D
OIL / GAS OR DUAL FIRED PACKAGE BOILER
This Steampacket D series comes with Dual Block Burners suitable for oil or gas or dual fuel firing. Like all the SuperTherm series this is also of three pass, wet back, fully packaged type of fusion welded construction. The range is from 6 TPH to 16 TPH.
These liberally rated boilers achieve maximum output whilst retaining compactness, to minimise floor space. The main features includes large furnace to avoid flame impingement, large water and steam space for meet fluctuating loads without fall in boiler operating pressure and dryness fractions to the order of 0.985.
Adequate access to both steam and water spaces are provided together with front and rear access doors for ease of maintenance.
Standard equipment includes pressure jet or rotary cup combustion equipment, steam and water mountings, feed water level controls, feed pump, integral wiring, insulation and cladding.
MAXECON T
OIL / GAS OR DUAL FUEL FIRED PACKAGE BOILER
This Maxecon T with a steam output range up to 40 TPH is a twin furnace boiler used in industrial steam or hot water applications is a very high quality boiler with a track record of highly efficient performance and reliability. When fitted with special control panels, single furnace firing is possible for indefinite periods. This ensures a lower turn down ratio and also permits maintenance work to be carried out on each burner in turn, whilst boiler output is maintained at up to 50% of normal rated output on the other furnace.
Can be supplied with super heaters to suit specific applications. Cylindrical, fully corrugated furnaces of welded construction are attached to each reversal chamber and the boiler front plate by welding.
Tubes are combination of plain and stay tubes are welded in. Plain tubes are expanded and seal welded in the reversal chambers. Integral superheaters can be accommodated with in this boiler to attain maximum outlet temperature of 300 Deg C.
WATER TUBE BOILERS
From shop assembled D type boilers to ESD boilers, Greens has supplied water tube boilers for various capacities up to 200 TPH. A water tube boiler can be designed for simple saturated steam for a heating application, or even for high pressure superheated steam for power generation. Apart from the oil and gas fired options, Greens also offers water tube boilers using Biomass, Coal, Wood Chips etc as fuels. These can be offered either with fluidised bed combustion or grate combustion.
RENEWABLE ENERGY
SOLID FUEL BOILERS
We apply cutting edge technology to conceptualise and engineer solutions to harness energy from naturally replenishable resources such as biomass and other agricultural wastes. We have both fluidised bed and grate combustion in this range for efficient utilisation of biomass fuels.
The fluidised bed combustion has the advantage of higher thermal efficiencies, reduced heating surface area and furnace volume, resulting in compact foot prints, suitability for low grade fuels and high ash fuels, easy ash removal, less fouling and tube corrosions.
The grate combustion brings sturdiness and flexibility to accept difficult fuel characteristics and composition. This continuously conveys the fuel through the combustion chamber and the fuel feeding can be automatically controlled. With adequate residence time it provides optimum burning to the fuel and surface exposure to the flame over the entire grate area.
MANUFACTURING
We offer a comprehensive range of fabrication services for the thermodynamic power and energy sectors, for which we utilise both existing as well as cooperative partner factory facilities.
Shanghai Greens Factory is located in Shanghai Fengxian District, covers an area of about 11,000 square meters to manufacture thermal energy equipment, energy saving equipment, heat exchangers and boiler parts. We have specialized workshop spaces for tube preparing, finning, butt welding, assembling, module building and assembly. In addition, there are NDT room, machining and storehouses.
CONSTRUCTION / SITE SERVICES
We have extensive experience and possess an excellent track record of working with international operators to execute large scale projects for the Energy industry.
We strongly believe in and actively pursue global network company partnerships, associations and cooperation, adopting a 21st century approach towards project work. Through such associations we can execute large scale regional projects with success and within defined time frames and budgets.
- Proven and successful engineering capabilities (full project cycle)
- Engineering and technical supply (all disciplines)
- Engineering, procurement, construction (EPC)
- Project management completion (PMC) and interface management
- Health, safety, environment, quality (HSEQ) & risk management
- Factory acceptence testing (FAT’s) and site acceptence testing (SAT’s)
- Mechanical completion (MC) management
- Commissioning (all disciplines)
- Training services and vendor bespoke training programs